| Mask-It
is a liquid chemical maskant used as a stop off for
anodizing, chromate conversion coating and other plating
on metals. Mask-It is fast drying (usually an hour at
room temperature) and is resistant to most chemical
processes normally required to anodize or electroplate.
Mask-It is completely resistant to hot solutions up
to 210°F and is tinted green for better scribe line
visibility. The cured film is tack free and will not
adhere to itself or other parts.
Apply one coat and allow 60 minutes to dry, then apply
a second coat and allow 15 minutes to dry before putting
into service.
|
