In business since 1991, Caswell Inc. supplies a complete range of plating kits including chrome, gold, nickel, copper, brass and many more. Caswell Inc. also sells aluminum anodizing kits, powder coating systems, metal polishing and buffing supplies and accessories. We offer free, web-based and phone based technical support on all our products and are proud to be the premier hobby plating site on the Internet.

Using simple instructions, classic formulas and basic equipment, we've turned home based electroplating of small items into a possibility. All of our plating products use the same professional quality chemicals and additives as commercial plating shops, so you can be sure of excellent results.

We don't stop at plating kits. We carry a full range of buffing wheels, compound, machines and kits. We also carry powder coating kits, lacquers, waxes, polishes, lubricants, sand blasting supplies, refining kits, soldering supplies, antiquing and bronzing solutions, epoxy repair materials and much, much more.

Caswell Inc. is an authorized distributor for Dupli-Color, Krylon, VHT, Collinite Wax, Flitz Polish, Permatex, Cyclone Blasting Products and many others.

Need something commercial? We sell our products to businesses big and small. Some of our customers include NASA, the US Air Force, Corning, schools, colleges and universities.

One of our customers said:
I followed the explicit directions that your team suggested to clean the tank and remove the old Kreme liner. Then, following the directions, I mixed up half the gas tank sealer product (12 oz total) and swished it around in the tank in all directions for about 15 minutes and let it drain. There was only a small dribble that came out. When the coating reached 'tacky', I mixed up the rest of the material and swished it around in the same manner. This time only about 4 ounces drained out. The dribble that had drained out before had set up - I am impressed. That stuff is hard as a rock. The 4 ounces that I drained into a paint mixing cup is even more impressive - it too is hard as a rock and virtually impervious. My tank is built such that it is nearly impossible to dump anything out of the fill neck - the neck extends into the tank. Therefore, I had to drain the tank through the outlet. In so doing, the buildup of material in the outlet closed off the opening to the point that I couldn't install the petcock and supply tube. A large drill bit and slow speed motor augured the gummy material out in perfect fashion. I won't be putting gas in it for quite some time; but so far, I am most impressed. Thanks again Regards Terry Behne
Read More Testimonials Here...